Functionalisation of the Boundary Layer by Deformation-Induced Martensite on Bearing Rings by means of Bulk Metal Forming Processes

verfasst von: Bernd Arno Behrens, Kai Brunotte, Hendrik Wester, Julius Peddinghausen, Michael Till
Abstract: During cold forming of metastable austenitic steels, a strength-increasing phase transformation induced by externally superimposed stresses occurs in addition to strain hardening. The effect of deformation-induced martensite formation has so far not been utilized industrially in the area of bulk forming, but could be suitable for the production of highly-loaded components in oxidative atmospheres. The aim of this study is the analysis of local phase transformations in metastable austenitic steels in the boundary layer of bulk formed components. For this purpose, the relationship between the process conditions occurring during bulk metal forming and the resulting martensitic phase fraction was determined. Cylinder compression tests are carried out in which the influence of various process parameters can be investigated. These include forming temperature, true plastic strain and forming speed. In a quantitative measurement by means of a magnetic induction process, local martensite formation is determined and hardness measurements are carried out. The recorded flow stress curves are implemented in a numerical simulation. Furthermore, the influence of different tool surface topographies on the contact conditions of the workpiece-tool system is characterized by means of ring compression tests. With the numerical simulations and experimentally obtained results, a surface hardening process for bearing rings is designed. The relationship between local true plastic strain and deformation-induced martensite development is explained by material flow simulations, taking into account the process route for manufacturing the bearing ring and the varying friction factors.
Organisationseinheit(en): Institut für Umformtechnik und Umformmaschinen
Typ: Aufsatz in Konferenzband
Seiten: 250-255
Anzahl der Seiten: 6
Publikationsdatum: 30.06.2022
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Werkstoffmechanik, Metalle und Legierungen, Oberflächen, Beschichtungen und Folien
Elektronische Version(en): https://doi.org/10.37904/metal.2022.4394 (Zugang: Offen)
: Details im Forschungsportal „Research@Leibniz University“

BibTeX

@inproceedings{d405a85a48cc4388b4b2910d4541e212,
title = "Functionalisation of the Boundary Layer by Deformation-Induced Martensite on Bearing Rings by means of Bulk Metal Forming Processes",
abstract = "During cold forming of metastable austenitic steels, a strength-increasing phase transformation induced by externally superimposed stresses occurs in addition to strain hardening. The effect of deformation-induced martensite formation has so far not been utilized industrially in the area of bulk forming, but could be suitable for the production of highly-loaded components in oxidative atmospheres. The aim of this study is the analysis of local phase transformations in metastable austenitic steels in the boundary layer of bulk formed components. For this purpose, the relationship between the process conditions occurring during bulk metal forming and the resulting martensitic phase fraction was determined. Cylinder compression tests are carried out in which the influence of various process parameters can be investigated. These include forming temperature, true plastic strain and forming speed. In a quantitative measurement by means of a magnetic induction process, local martensite formation is determined and hardness measurements are carried out. The recorded flow stress curves are implemented in a numerical simulation. Furthermore, the influence of different tool surface topographies on the contact conditions of the workpiece-tool system is characterized by means of ring compression tests. With the numerical simulations and experimentally obtained results, a surface hardening process for bearing rings is designed. The relationship between local true plastic strain and deformation-induced martensite development is explained by material flow simulations, taking into account the process route for manufacturing the bearing ring and the varying friction factors.",
keywords = "Bulk metal forming, local martensite formation, phase transformation",
author = "Behrens, {Bernd Arno} and Kai Brunotte and Hendrik Wester and Julius Peddinghausen and Michael Till",
note = "Funding Information: The authors would like to thank the German Research Foundation (DFG) for the financial support of the project (Project-No. 423160066) ; 31st International Conference on Metallurgy and Materials, METAL 2022 ; Conference date: 18-05-2022 Through 19-05-2022",
year = "2022",
month = jun,
day = "30",
doi = "10.37904/metal.2022.4394",
language = "English",
series = "METAL Conference Proeedings",
publisher = "TANGER Ltd.",
pages = "250--255",
booktitle = "31st International Conference on Metallurgy and Materials, METAL 2022",
}