Basic study on the process combination of deposition welding and subsequent hot bulk forming

verfasst von: Bernd Arno Behrens, Ludger Overmeyer, Alexander Barroi, Conrad Frischkorn, Jörg Hermsdorf, Stefan Kaierle, Malte Stonis, Adis Huskic
Abstract: Today most technical parts and components are made of monolithic materials. Nevertheless, the previously used monolithic materials reach their technological and constructive limits, so that an improvement of the component properties can be realized by hybrid parts. Forging of previously joined semi-finished products to net shape hybrid components is a promising method to produce functional adapted parts in a few process steps. This new process chain offers a number of advantages compared to other manufacturing technologies. Examples are the production of specific load-adapted forging parts with a high level of material utilization, an improvement of the joining zone caused by the followed forming process and an easy to implement joining process because of the simple geometries of the semi-finished products. This paper describes the production process of hybrid steel parts, which are produced by a combination of a deposition welding process with a subsequent hot forging (upsetting) or cross-wedge-rolling. It could be shown that the innovative process chain enables the production of hybrid parts whereby the forging processes lead to an improvement of the mechanical properties of the laser deposited material.
Organisationseinheit(en): Institut für Umformtechnik und Umformmaschinen
Externe Organisation(en): Laser Zentrum Hannover e.V. (LZH)
Institut für integrierte Produktion Hannover (IPH) gGmbH
Typ: Artikel
Journal: Production Engineering
Band: 7
Seiten: 585-591
Anzahl der Seiten: 7
ISSN: 0944-6524
Publikationsdatum: 18.05.2013
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Maschinenbau, Wirtschaftsingenieurwesen und Fertigungstechnik
Elektronische Version(en): https://doi.org/10.1007/s11740-013-0478-y (Zugang: Unbekannt)
: Details im Forschungsportal „Research@Leibniz University“

BibTeX

@article{4800a94a6d6a4daa8abe10427e7c2879,
title = "Basic study on the process combination of deposition welding and subsequent hot bulk forming",
abstract = "Today most technical parts and components are made of monolithic materials. Nevertheless, the previously used monolithic materials reach their technological and constructive limits, so that an improvement of the component properties can be realized by hybrid parts. Forging of previously joined semi-finished products to net shape hybrid components is a promising method to produce functional adapted parts in a few process steps. This new process chain offers a number of advantages compared to other manufacturing technologies. Examples are the production of specific load-adapted forging parts with a high level of material utilization, an improvement of the joining zone caused by the followed forming process and an easy to implement joining process because of the simple geometries of the semi-finished products. This paper describes the production process of hybrid steel parts, which are produced by a combination of a deposition welding process with a subsequent hot forging (upsetting) or cross-wedge-rolling. It could be shown that the innovative process chain enables the production of hybrid parts whereby the forging processes lead to an improvement of the mechanical properties of the laser deposited material.",
keywords = "Cross-wedge-rolling, Deposition welding, Hot forging, Process chain",
author = "Behrens, {Bernd Arno} and Ludger Overmeyer and Alexander Barroi and Conrad Frischkorn and J{\"o}rg Hermsdorf and Stefan Kaierle and Malte Stonis and Adis Huskic",
year = "2013",
month = may,
day = "18",
doi = "10.1007/s11740-013-0478-y",
language = "English",
volume = "7",
pages = "585--591",
journal = "Production Engineering",
issn = "0944-6524",
publisher = "Springer Verlag",
number = "6",
}