An adapted case-based reasoning system for design and manufacturing of tailored forming multi-material components

verfasst von: Renan Siqueira, Mehdi Bibani, Deniz Duran, Iryna Mozgova, Roland Lachmayer, Bernd Arno Behrens
Abstract: New manufacturing technologies need suitable design methods to deal with the presented challenges. Equally, design methods must deliver innovative solutions and give a direction to the development of these manufacturing technologies. One of these in-development technologies is tailored forming, a process-chain to manufacture higher-performance hybrid components. Therefore, this process requires a proper design method to deal with the challenges of multi-material design and the manufacturing restrictions involved. The lack of a fluent communication between design and manufacturing is, however, an obstacle to achieve the desired goals. With this intent, the present study wants to bridge both fields by creating a common platform for information exchange. For that, a case-based reasoning environment is used as an interface and adapted to allow the flow of both kinds of data. On the design side, a parametric model is constructed and simulated through an automated interface, generating a large solution space. On the manufacturing side, the geometries are digitized and compared with the simulated results. At the end, the method is able to deliver an optimized design that covers the restrictions of the manufacturing process, allowing the further development of tailored forming technology.
Organisationseinheit(en): Institut für Produktentwicklung und Gerätebau
Institut für Umformtechnik und Umformmaschinen
Typ: Artikel
Journal: International Journal on Interactive Design and Manufacturing
Band: 13
Seiten: 1175-1184
Anzahl der Seiten: 10
ISSN: 1955-2513
Publikationsdatum: 01.09.2019
Publikationsstatus: Veröffentlicht
Peer-reviewed: Ja
ASJC Scopus Sachgebiete: Modellierung und Simulation, Wirtschaftsingenieurwesen und Fertigungstechnik
Elektronische Version(en): https://doi.org/10.1007/s12008-019-00566-7 (Zugang: Geschlossen)
: Details im Forschungsportal „Research@Leibniz University“

BibTeX

@article{3b103b6a40ee483daa90da5187c107e5,
title = "An adapted case-based reasoning system for design and manufacturing of tailored forming multi-material components",
abstract = "New manufacturing technologies need suitable design methods to deal with the presented challenges. Equally, design methods must deliver innovative solutions and give a direction to the development of these manufacturing technologies. One of these in-development technologies is tailored forming, a process-chain to manufacture higher-performance hybrid components. Therefore, this process requires a proper design method to deal with the challenges of multi-material design and the manufacturing restrictions involved. The lack of a fluent communication between design and manufacturing is, however, an obstacle to achieve the desired goals. With this intent, the present study wants to bridge both fields by creating a common platform for information exchange. For that, a case-based reasoning environment is used as an interface and adapted to allow the flow of both kinds of data. On the design side, a parametric model is constructed and simulated through an automated interface, generating a large solution space. On the manufacturing side, the geometries are digitized and compared with the simulated results. At the end, the method is able to deliver an optimized design that covers the restrictions of the manufacturing process, allowing the further development of tailored forming technology.",
keywords = "Computer aided design, Design methods, Engineering design, Multi-material design, Parametric design",
author = "Renan Siqueira and Mehdi Bibani and Deniz Duran and Iryna Mozgova and Roland Lachmayer and Behrens, {Bernd Arno}",
note = "Funding information: The results presented in this paper were obtained under the umbrella of Collaborative Research Center 1153 “Process Chain for Manufacturing Hybrid High-Performance Components by Tailored Forming”, preliminary inspection project C2. The authors would like to thank the German Research Foundation (DFG) and the CRC 1153 for its financial and organizational support.",
year = "2019",
month = sep,
day = "1",
doi = "10.1007/s12008-019-00566-7",
language = "English",
volume = "13",
pages = "1175--1184",
journal = "International Journal on Interactive Design and Manufacturing",
issn = "1955-2513",
publisher = "Springer Paris",
number = "3",
}