FEA Based Tool Life Quantity Estimation of Hot Forging Dies Under Cyclic Thermo‐Mechanical Loads

authored by: B. A. Behrens, A. Bouguecha, F. Schäfer, T. Hadifi
Abstract: Hot forging dies are exposed during service to a combination of cyclic thermo-mechanical, tribological and chemical loads. Besides abrasive and adhesive wear on the die surface, fatigue crack initiation with subsequent fracture is one of the most frequent causes of failure. In order to extend the tool life, the finite element analysis (FEA) may serve as a means for process design and process optimisation. So far the FEA based estimation of the production cycles until initial cracking is limited as tool material behaviour due to repeated loading is not captured with the required accuracy. Material models which are able to account for cyclic effects are not verified for the fatigue life predictions of forging dies. Furthermore fatigue properties from strain controlled fatigue tests of relevant hot work steels are to date not available to allow for a close-to-reality fatigue life prediction. Two industrial forging processes, where clear fatigue crack initiation has been observed are considered for a fatigue analysis. For this purpose the relevant tool components are modelled with elasto-plastic material behaviour. The predicted sites, where crack initiation occurs, agree with the ones observed on the real die component.
Organisation(s): Institute of Metal Forming and Metal Forming Machines
Type: Conference contribution
Pages: 303-308
No. of pages: 6
Publication date: 27.01.2010
Publication status: Published
Peer reviewed: Yes
ASJC Scopus subject areas: General Physics and Astronomy
Electronic version(s): https://doi.org/10.1063/1.3552459 (Access: Unknown)
: Details in the research portal "Research@Leibniz University"

BibTeX

@inproceedings{909808bfad70456a8f72de3fae558299,
title = "FEA Based Tool Life Quantity Estimation of Hot Forging Dies Under Cyclic Thermo‐Mechanical Loads",
abstract = "Hot forging dies are exposed during service to a combination of cyclic thermo-mechanical, tribological and chemical loads. Besides abrasive and adhesive wear on the die surface, fatigue crack initiation with subsequent fracture is one of the most frequent causes of failure. In order to extend the tool life, the finite element analysis (FEA) may serve as a means for process design and process optimisation. So far the FEA based estimation of the production cycles until initial cracking is limited as tool material behaviour due to repeated loading is not captured with the required accuracy. Material models which are able to account for cyclic effects are not verified for the fatigue life predictions of forging dies. Furthermore fatigue properties from strain controlled fatigue tests of relevant hot work steels are to date not available to allow for a close-to-reality fatigue life prediction. Two industrial forging processes, where clear fatigue crack initiation has been observed are considered for a fatigue analysis. For this purpose the relevant tool components are modelled with elasto-plastic material behaviour. The predicted sites, where crack initiation occurs, agree with the ones observed on the real die component.",
keywords = "crack initiation, FE based fatigue life estimation, forging, thermo-mechanical fatigue",
author = "Behrens, {B. A.} and A. Bouguecha and F. Sch{\"a}fer and T. Hadifi",
year = "2010",
month = jan,
day = "27",
doi = "10.1063/1.3552459",
language = "English",
isbn = "9780735408715",
series = "AIP Conference Proceedings",
pages = "303--308",
booktitle = "International Conference on Advances in Materials and Processing Technologies, AMPT2010",
note = "International Conference on Advances in Materials and Processing Technologies, AMPT2010 ; Conference date: 24-10-2010 Through 27-10-2010",
}